Skip to content
PAPSTORECart, 0,00€0 items
Paramotor specs
ENGINEVITTORAZI MOSTER 185 EFI
CYLINDER184.7 CC
POWER26 HP at 8,600 rpm
CONSUMPTION2.5 L/h at 30 kg
TRANSMISSIONPOLY-V BELT
STARTERELECTRIC
PARAMOTOR WEIGHT28.5 KG (63 LB)
REDUCTION2.87
PARAMOTOR CONFIGURATOR

TINOX V2 PARAMOTOR · MOSTER 185 EFI MY25

Main features
HARNESS SIZE
HARNESS SEAT BOARD
PROPELLER
PROPELLER SIZE
PROPELLER QUICK RELEASE (ONLY MOSTER)
CONFIGURATION TOTAL
€8,206.00+ VAT
Main features
Vittorazi Moster 185 EFI

184.7 cc and 26 HP at 8,600 rpm, with electronic fuel injection and electric start. Just 2.5 L/h at 30 kg of thrust.

Fuel injection system

The sealed Full Integrated Unit (ECU, fuel pump and filter) feeds a 22 mm CNC throttle body, adjusting the engine in real time for a sharper throttle response.

Cooling shroud

It wraps the cylinder head and draws the airflow from the propeller over the cooling fins.

Control display

Shows rpm, throttle, battery, fuel flow and EGT, then fuel on board and flight time left, with a warning if anything needs attention.

Off-grid throttle with start button

Wired for the Moster EFI: double-press and hold the button on the grip to start, hold it to stop.

EFI battery

A 14.8 V, 3,300 mAh LiPo battery in an aluminum case. It powers the injection and the starter for 5 to 7 hours at cruise, and charges on the ground with the supplied charger.

EGT sensor

Reads the exhaust gas temperature, so the ECU can add fuel to keep it within its limit. You see it live on the display.

17 L fuel tank

The biggest of the three tank options (10, 13.5 and 17 L). At 2.5 L/h it holds close to seven hours of fuel.