Skip to content

TINOX V2 paramotor by PAP TEAM

Three PAP Tinox V2 paramotors: one with a Polini engine, one with a Vittorazi engine and E-Props propeller, and one with an Atom engine

Be the first one in the sky

We designed the TINOX V2 paramotor to be incredibly quick and easy to assemble and take apart. About one minute and your powered paraglider is ready to fly.

00:00:00 Step 00 / 04
Motor and harness, packed and ready.
▶Watch the demo video
TINOX assembly, step 1TINOX assembly, step 2TINOX assembly, step 3TINOX assembly, step 4TINOX assembly, step 5

Choose your engine

ATOM 80 MY25

From €5,506 + VAT

A light engine, great for your first flights. Its 78.2 cc and 16 HP give smooth, linear power, and the whole paramotor weighs just 21 kg, so it is easy to carry and easy to launch. Quiet, with low vibration and low consumption, it suits lighter pilots who want exactly that: a simple, relaxed way to fly.

VITTORAZI ATOM 80
ENGINE
78.2 CC
CYLINDER
16 HP at 9,500 rpm
POWER
2.7 L/h at 30 kg
CONSUMPTION
HELICOIDAL GEARS
TRANSMISSION
MANUAL
STARTER
21 KG (46 LB)
PARAMOTOR WEIGHT
Customize your TINOX V2
Vittorazi Atom 80

The lightest of the range: just 21 kg ready to fly, with a smooth power curve and a soft pull start.

Low noise

A quiet, efficient exhaust and a reduction drive that runs with less vibration and gear noise.

Compact engine

Extremely compact for its power, with the chromed exhaust tucked tight underneath.

Walbro carburetor

Walbro diaphragm carburetor fed through the airbox silencer, with a dual-sponge filter.

13.5 L fuel tank

At 2.7 L/h, up to five hours in the air.

Fuel primer bulb

A few squeezes bring fuel up to the carburetor, so the engine fires in fewer pulls.

Starter handle quick release

A push-pin system holds the starter handle in place and releases it in seconds.

Throttle cable retainer

A safety elastic on the throttle cable keeps it from reaching the propeller.

Paramotor frame details

Materials & finishes

We provided the TINOX with a Stainless Steel body to withstand hard landings. In the case of the cage, you can choose between Titanium, Black Titanium and Stainless Steel in 1400 and 1500.

TINOX chassis in stainless steel
Stainless
TINOX chassis in titanium
Titanium
TINOX chassis in black titanium
Black titanium
Cage sizes 1400125 / 130 cm propeller 1500140 cm propeller

It is all in the small details

The harness is bolted to the frame, so it cannot move at all: maximum comfort in the air.

Make it yours

7 net color options to match your style. Pick one to see it on the frame.

Net color · BLACK
TINOX V2 cage with BLACK netTINOX V2 cage with RED netTINOX V2 cage with ORANGE netTINOX V2 cage with YELLOW netTINOX V2 cage with GREEN netTINOX V2 cage with BLUE netTINOX V2 cage with PINK net
PAP SLC V2 harness

PAP SLC V2 harness

The PAP Harness SLC V2 is the result of feedback from our customers and extensive testing with our factory pilots, aiming to find the perfect balance between lightweight design, comfort and safety. We have geometrically redesigned the harness in sizes M, L and XL to ensure optimal geometry for each pilot.

Lighter
New, stronger and lighter materials save 350 g over the previous model (size M: 2.57 kg).
New leg attachment point
More freedom for your legs during the take-off run, and easier to get seated once in the air.
Side strap adjusters
Fine-tune the fit of the harness around your ribs.
Removable airbag
Absorbs impact in a bad landing and attaches or detaches whenever you need. Side reserve container, radio pocket and instrument window.

Which harness size is for me?

M L XL

Find your height (cm) on the left and your weight (kg) below.

HEIGHT CM/FT
150 4'11"
M
155 5'1"
M
160 5'3"
M
165 5'5"
M
170 5'7"
M
175 5'9"
M
L
XL
180 5'11"
M
L
XL
185 6'1"
L
XL
190 6'3"
XL
195 6'5"
XL
200 6'7"
XL
50/110 60/132 70/154 80/176 90/198 100/220 110/243 120/265 130/287
WEIGHT · KG/LB

Take it anywhere

PAP cage bag Included
Cage bag

Padded bag for the cage, with a document pocket and carry handles. Comes with every paramotor and every paramotor kit.

PAP paramotor transport bag
Optional
Paramotor transport bag

The right accessory to move or store your paramotor fully protected. Sold separately, not included as standard.

Use it with our trikes

Customize

Build the paramotor of your dreams

Engine, cage size, frame material, net color, harness and tank: build your TINOX V2 piece by piece, just the way you've always imagined it.

PAP TINOX V2 paramotor ready to configure

What's in the box?

Everything included with your Paramotor TINOX V2, ready to fly.

PAP Tinox V2 paramotor with harness
Complete paramotor
Ready to fly
Propeller
Sized for your engine
PAP cage bag
Cage bag
Padded, with document pocket
PAP propeller covers
Propeller covers
Protect the blades in transport
PAP 1989 t-shirt
PAP T-shirt
Welcome to the team
User manual
Read it before your first flight